Chewed insulation from rodents, a DIY splice gone wrong, or wiring exposed after water damage all need the same thing: a fast, correct repair before it becomes a fire hazard.
We diagnose the damage, repair or reroute the wiring, and confirm the circuit is safe.
Book a Service
A licensed electrician will contact you within 2 hours.
No obligation · 100% confidential · Licensed & insured
Cities Served
0
CA Licensed
C-0
Avg. Rating
0.0★
Cities Served
/7
Damaged Wiring Fix
Wiring Repair: What It Is and Why It Matters
Wiring repair addresses damaged, exposed, or improperly connected wiring in an existing electrical system. The most common causes we see are rodent damage in attics and crawl spaces, exposed splices left behind by prior DIY work, wiring damaged during a remodel, and water intrusion from roof or plumbing leaks. Left alone, damaged wiring creates a real fire and shock risk, especially where insulation is chewed through or a splice is left uncovered outside a junction box.
Homeowners usually notice a problem after a breaker trips repeatedly, an outlet stops working, or they spot exposed wire in an attic or wall opening. We trace the circuit, identify every point of damage, and repair or replace the affected section, code compliant, whether that’s re-splicing wire in a proper junction box, replacing a chewed run, or rerouting wiring damaged by water.
Signs Your Wiring Needs Repair
Exposed wire or bare splices in attic or walls
Breaker trips repeatedly on one circuit
Signs of rodent damage to insulation
Wiring exposed after a water leak
All Services
Related Wiring Services
Aluminum Wiring Replacement
Addressing original aluminum branch wiring in older homes
“Rodent damage and old DIY splices are the two repairs we see most. Both look minor from the outside but the exposed wire underneath is a real fire risk if it’s left alone.”
T
Terrence Ojo
Electrician
★★★★★
“We found chewed wiring in our attic after a rat problem and had no idea how bad it was until Electrical Land traced the whole circuit. They repaired it same-day and explained exactly what they fixed.”
L
Ling Fujimoto
Homeowner
Questions
Wiring Repair FAQs
How do I know if my wiring needs repair?
Warning signs include a breaker that trips repeatedly on one circuit, outlets that stop working, exposed or bare wire in an attic or wall opening, and any burning smell near an outlet or switch. Any of these warrant an inspection.
Is exposed wiring a fire hazard?
Yes. Exposed conductors or unenclosed splices can arc or short, especially near insulation, wood framing, or moisture. Exposed wiring should be repaired as soon as it’s discovered.
Can damaged wiring from rodents be repaired, or does it need full replacement?
It depends on the extent of the damage. Isolated chewed sections can often be repaired or spliced properly. Widespread damage across multiple runs may call for replacing the affected wiring rather than patching it repeatedly.
How much does wiring repair cost?
Cost depends on how much wiring is affected and how accessible it is. We assess the damage on-site and provide a written estimate before starting any repair work.